Electric-Hydraulic Converters
Category: Accessories
Application: Commercial, Sports Fields
Toro® Electric-Hydraulic Converters (EHC) provide the ability to bring together electrical outputs from sophisticated electric controllers and the pressure-based signals in hydraulic irrigation systems.
Highlights
- Supplied pre-plumbed with in-line filter on inlet supply line, pre-assembled on sturdy plastic mounting plate
- Direct manual control activated any sprinkler from the converter
- Any single converter unit can be replaced easily without affecting other converters
- Easily added to for system expansion
- Optional plastic pedestal (89-8342)
Features
Pressure: 280-1034 kPa
Wiring: 0.82 mm2 x 1.2 metre wire leads
– Maximum distance from converter to valve: 1/4” OD – 300 metres
Normally Open: Valve elevation should not exceed 7.6 metres above, 21 metres below controller elevation
Normally Closed: Valve elevation should not exceed 0 metres above or 21 metres below controller elevation
Suits Toro hydraulic tube ¼” x 1/8”
Specifications
Dimensions
4 Station: 224 mm W x 115 mm H x 64 mm D
12 Station: 224 mm W x 318 mm H x 64 mm D
16 Station: 224 mm W x 420 mm H x 64 mm D
Electrical Specifications
Input Power:
− 24VAC, 50 Hz
− Holding – 0.30 amps
− Inrush – 0.37 amps
Warranty
2-Years
Related Products
Low Voltage Heat Shrink Cable Connectors
Hippo Clamps
Xpando® Take-Off Fittings
PVC Utility Swing Check Valve
